Wall-powered torque. Marker-thin control.
Hang the 180W motor on its desk stand, pick up the slim flex-shaft wand, and engrave steel, glass, wood and.
Claim 50% Off — Order NowIn Stock – Free 5–7 Day US Shipping
Most engraving pens make you choose between torque and control. The EtchPro 180 gives you both.
A corded 180W motor keeps the bit spinning through stainless steel, bone and dense hardwood. No battery fade, no recharge breaks, no stalled letters.
Hang the motor overhead and hold only the slim wand. Your engraved handwriting looks like your real handwriting.
Roll the orange wheel from 10,000 RPM for acrylic and glass up to 37,000 RPM for cutting brass and steel.
Diamond burrs, HSS drills, cutoff discs, sanding drums, felt wheels, wire brushes and polishing compound, all in one zippered case.
Clamp the telescopic stand to your desk and hang the 180W body by its top loop. The motor's weight stays on the stand while the cord supplies steady wall power.
Roll the orange thumbwheel through five settings. Low for plastic and glass so nothing melts or chips, high for metal and cutting.
Hold the slim flex-shaft wand in a normal pen grip and guide the burr. Clean, continuous grooves in a single pass.
Limited-Time Direct Offer — Save 50% Today
180W Corded Rotary & Flex-Shaft Engraving Workstation
Backed by our 30-Day Money-Back Trial & Full Cosari Guarantee.
$79.99 $159.99 Free Tracked Shipping (5–7 Days) Included
In Stock: Delivers in 5–7 Business Days. Free insured US delivery with tracking.
30-Day Money-Back Guarantee plus a full 2-Year Warranty.
Quantity
Product Description: The Cosari EtchPro 180 pairs a 180W corded rotary motor with a slim flexible shaft and a clamp-on telescopic hanging stand. Hang the motor overhead, hold the wand like a pen, and engrave metal, glass, wood, bone and plastic with steady wall power. A 5-step speed wheel covers 10,000 to 37,000 RPM, and the standard 3.2mm collet accepts common replacement bits.
Who It's For: Woodworkers, jewellery makers, glass etchers, nurses and mechanics marking their gear, and anyone tired of cordless pens that stall on hard materials. The included bit tray also makes it a capable all-round rotary tool for drilling, sanding, cutting and polishing around the house.
Shipping & Returns: Free tracked shipping on every order. If the EtchPro 180 isn't right for you, return it within 30 days for a full refund, no restocking fee.
Free 5–7 Day US Shipping: Every order ships free with full tracking and delivers in 5 to 7 business days.
30-Day Trial: Try it at home for 30 days risk-free. Need help? Email us anytime at support@buycosari.com.
2-Year Warranty: If anything goes wrong within 2 years, we replace it free of charge or refund your order in full.
The hanging stand carries the motor so your fingers only guide the slim wand. Our reviewers worked an hour without hand numbness.
A machined silver collet holds standard 3.2mm shanks dead-centre, so the tip cuts clean lines instead of chattering.
Steel, brass, glass, walnut, bone and acrylic. The included bits and five speeds cover them all.
Cosari EtchPro 180Standard Competitors
| Feature | Cosari EtchPro 180 | Standard Competitors |
|---|---|---|
| Engraving stainless steel | Smooth, continuous grooves at Speed 2-3 | Cordless pens skip or stall mid-letter |
| Long carving sessions | Corded, zero recharge downtime | Battery pens fade, then need charging |
| Neat handwriting | Slim flex-shaft wand, motor on stand | Holding the full motor or a jackhammering tip |
| Speed control | 5 steps, 10,000 to 37,000 RPM | Often fixed speed or limited range |
| Bits in the box | Full tray: burrs, drills, discs, wheels, compound | One to a handful of tips |
Swipe left for steps 2 and 3
Tighten the stand onto your desk edge, hook the motor's top loop onto the arm, and plug in.
Attach the flex shaft, lock a burr into the collet, and roll the orange wheel to Speed 3.
Hold the wand like a pen and write. Clean lettering in one smooth pass.
Finally found a reliable workhorse. This Focse 180W corded rotary tool handles delicate woodwork and harder materials like bone without skipping a beat. The matte-black housing feels solid in hand, with steady torque across the 1–5 orange speed dial. Wish I had bought it from the very start.
If you're sensitive to noise and hand fatigue, this setup really delivers. Hanging the motor on the telescopic desk clamp stand and holding the lightweight flex-shaft attachment cuts vibration way down. Dialing the 10,000–37,000 RPM thumbwheel lower lets me work for hours without my hand going numb.
The 180W motor engraves smoothly on metal, wood, and plastic without much effort, and it cuts into wood nicely. Because it's a corded AC unit with a sturdy ribbed strain-relief boot, you get steady power that never slows down mid-project, plus very minimal vibration.
Super easy to control. Once I attached the slim black flexible shaft handpiece with a fine diamond burr bit from the blue organizer case, my handwriting looked just like using a marker. Worked great for engraving my name onto my stethoscope.
Very straightforward rotary kit to pick up and use. It works well across metal, plastic, and glass. Using the flexible shaft wand keeps things lightweight and comfortable in your hand, even when you're etching for longer stretches at the workbench.
Holding the slim flexible shaft handpiece feels way more like a pen than gripping a bulky rotary body directly. That narrow, grippy wand really pays off during long sessions. When we engraved lettering into metal, our writing came out remarkably neat compared to other tools we've tried.
I really like this set and definitely recommend it if you're just starting out in crafting. The zippered Focse carry bag comes packed with safety glasses, drill bits, sanding bands, felt wheels, and diamond burrs, so beginners don't have to hunt down extras.
Great quality and quick shipping. Holds comfortably, etches cleanly, and the black zippered Focse case with the full accessory layout looks super impressive when unzipped. Bought it as a gift and it was an instant hit.
Glad I skipped those bare-tool kits that only give you a single bit and make you buy everything separately. Right out of the bag, this Focse kit includes a whole blue tray of diamond burrs, twist drills, cutting discs, sanding drums, and polishing compounds.
A lot of basic engravers have zero speed control and only include diamond tips. Having the 5-step orange speed dial from 10,000 to 37,000 RPM makes a huge difference, and you also get HSS drill bits, saw blades, wire brushes, grinding stones, and felt buffing wheels.
$79.99 $159.99 Free Tracked Shipping (5–7 Days) Included
In Stock – Free 5–7 Day US Shipping · 30-Day Risk-Free Trial.
It's a 180W AC corded tool with a ribbed strain-relief boot where the cord leaves the body. There's no battery, so it never slows down or needs charging mid-project. The trade-off is that you need to work near an outlet.
Yes. In our tests it engraved 304 stainless steel, glass, cattle bone, brass, acrylic and black walnut. The kit includes diamond burrs, grinding stones and HSS bits suited to each material.
Not with this setup. You hang the motor from its top loop on the included desk stand and hold only the slim flexible-shaft wand, which feels much closer to a marker than a power tool.
As a starting point, use Speed 1 to 2 for plastic, acrylic and glass, Speed 2 to 3 for engraving metal and wood, and Speed 4 to 5 for cutting, drilling and grinding. Test on a scrap piece first.
Yes. The silver metal collet takes standard 3.2mm (1/8-inch) shanks, which most hardware stores and online bit sets use.
You have 30 days to use it on your own projects. If you're not happy, send it back for a full refund. Shipping is free and tracked, and the motor and collet are covered by a 2-year warranty.