Slices Oak, Walnut & Limbs—Zero Binding.
Stop wrestling rusty push saws that buckle and jam mid-cut.
Claim 50% Off — Order NowIn Stock – Free 5–7 Day US Shipping
We combined Japanese pull-stroke tension geometry with a thick, non-stick matte-black SK5 utility blade and a zero-play mechanical lock.
Precision-ground 7 TPI omega teeth hardened to HRC 60–62 shave wood fibers cleanly on the pull stroke—cutting Oak, Walnut, Pine, and plywood in half the strokes.
A 0.04mm low-friction matte-black finish stops sticky pine resin and wet sap from grabbing the blade, eliminating the #1 cause of mid-cut binding.
Anchored by a machined 8mm silver hex bolt and a positive black spine lock lever that holds the blade rock-solid both open and folded closed.
Slip-resistant TPR rubber overmolding locks comfortably into bare or gloved hands for effortless one- or two-handed pull rhythm without wrist strain.
Traditional push saws force thin steel into compression until it bows and jams. The Talon-SK5 cuts strictly as you pull toward your body—keeping the 1.2mm SK5 blade under dead-straight tension while ejecting clean sawdust chips.
Press the black steel lock release to unfold the 250mm matte-black blade until it clicks rigid. The exposed silver hex pivot bolt prevents side-to-side wobble under load and lets you adjust tension or swap blades in seconds.
Where a 20-inch fixed carpenter saw bashes into adjacent walls and tree crotches, the Talon-SK5's compact profile and curved red-and-black pistol grip let you get into a smooth, fast cutting rhythm inside tight spaces.
Limited-Time Direct Offer — Save 50% Today
High-Carbon SK5 Triple-Bevel Pull Blade · Non-Stick Matte-Black PTFE Coating · Hex-Bolt Lock
Backed by our 30-Day Money-Back Trial & Full Cosari Guarantee.
$39.99 $79.99 Free Tracked Shipping (5–7 Days) Included
In Stock: Delivers in 5–7 Business Days. Free insured US delivery with tracking.
30-Day Money-Back Guarantee plus a full 2-Year Warranty.
Quantity
Built for Homeowners & Woodworkers Who Hate Stuck Saws: Whether you are trimming an overhanging 4-inch oak branch without waking the neighbors with a chainsaw, or cross-cutting walnut, pine, and plywood in the garage, the Cosari Talon-SK5 delivers razor-straight cuts on the pull stroke. Its 1.2mm SK5 high-carbon steel blade is coated in matte-black PTFE to shed sticky resin and resist corrosion.
Industrial Materials & Precision Dimensions: Blade Material: 1.2mm SK5 High-Carbon Tool Steel (HRC 60–62) with white laser-etched specs and 0.04mm Matte-Black PTFE coating. Tooth Profile: 7 TPI Triple-Bevel Impulse-Hardened Omega Teeth. Pivot & Lock: 8mm Machined Silver Hex Bolt + Positive Black Steel Spine Lock. Handle: Curved Dual-Density Polymer & Red/Black TPR Rubber Grip. Length: 250mm working blade (folds to 300mm; 285g total weight).
The 30-Day Oak, Walnut & Backyard Timber Guarantee: Put the Talon-SK5 to work in your shop and yard for 30 full days. If it ever binds in sap-heavy wood, develops pivot play, or fails to out-cut your old push saw in half the strokes, return it for a 100% refund. Protected by our 2-Year Blade & Lock Replacement Warranty.
Free 5–7 Day US Shipping: Every order ships free with full tracking and delivers in 5 to 7 business days.
30-Day Trial: Try it at home for 30 days risk-free. Need help? Email us anytime at support@buycosari.com.
2-Year Warranty: If anything goes wrong within 2 years, we replace it free of charge or refund your order in full.
Pulling keeps the 1.2mm SK5 steel under natural tension so you never fight a bowed, pinched blade halfway through a cut—even when reaching overhead at awkward angles.
Tested across seasoned White Oak, Black Walnut, sap-rich Pine, Baltic Birch plywood, and wet green fruitwood—delivering splinter-free edges without changing tools.
Replaces clumsy 20-inch pegboard saws that bash into tight corners; folds completely closed in one second to live in your truck glovebox, kitchen drawer, or belt pouch.
Cosari Talon-SK5 Folding Pull SawStandard Competitors
| Feature | Cosari Talon-SK5 Folding Pull Saw | Standard Competitors |
|---|---|---|
| Cutting Direction & Physics | Pull-Stroke Tension (Never Buckles) | Push-Stroke Compression (Bows & Jams) |
| Blade Steel & Anti-Sap Surface | 1.2mm SK5 Steel + Matte-Black PTFE | Thin Stamped Uncoated Sheet Metal |
| Multi-Material Versatility | Oak, Walnut, Pine, Plywood & Live Limbs | Single-Purpose (Either Rough Yard or Dry Trim) |
| Pivot & Lock Construction | 8mm Silver Hex Bolt + Positive Black Lock | Permanent Stamped Rivet or Flimsy Latch |
| Storage & Tight-Corner Clearance | Folds Safe Into 300mm Handle Channel | Awkward 20-Inch Fixed Exposed Blade |
Swipe left for steps 2 and 3
Depress the black spine lock release button and swing the matte-black SK5 blade open until it clicks solidly into the locked cutting position.
Set the teeth on your mark and draw the curved red-and-black grip toward you with light pressure—slicing through oak, walnut, pine, or limbs in seconds.
Press the black release lever to fold the serrated teeth completely inside the handle channel, then slip the saw into your drawer, truck box, or belt pouch.
My wife bought me this DELIXI folding hand saw last year. I've used it on Oak, Walnut, and Pine. The pull cut stays controlled for pruning, rough carpentry, and trimming backyard timbers.
Trust me, I've tried a lot of them, including expensive specialty saws. This DELIXI is my favorite all-around utility and pruning saw. The factory-ground triple-bevel teeth cut fast and arrive properly sharp.
This folding pull saw is the best, hands down. Accurate and sharp, with a solid pivot. The silver hex bolt also makes it straightforward to tighten the joint or swap the matte-black blade later.
Pull-stroke cutting just feels cleaner and takes less effort for me. This red-and-black DELIXI folding saw has handled weekend pruning and small lumber cuts really well, especially considering what I paid.
I've cut Oak, Walnut, Pine, and plywood without issues. The matte-black coated steel blade moves through sap-heavy Pine without constantly pinching, and it stayed smooth and steady while cutting seasoned Oak.
The curved red-and-black rubberized handle has enough room for gloves and even a two-handed grip when needed. It doesn't feel cumbersome, though, because the blade locks down and folds neatly for carrying.
I switched from a 20-inch full-size saw to the 240mm folding version. I can work inside tight tree crotches and cramped workshop corners now without needing a huge amount of swing clearance.
I've owned plenty of hand saws, and this tooth pattern is seriously aggressive. The serrations on the matte-black blade clear material quickly, while the solid black spine lock keeps everything rigid under load.
For a saw built for speed, it's easy to get into a nice rhythm. The curved pistol-style red-and-black grip keeps my hand planted during quick clearing cuts, even when I'm wearing work gloves.
My old push saws would buckle and get stuck in green wood constantly. The pull-cut teeth and low-friction matte-black blade on this one solved that problem completely. It tracks straight without fighting me.
$39.99 $79.99 Free Tracked Shipping (5–7 Days) Included
In Stock – Free 5–7 Day US Shipping · 30-Day Risk-Free Trial.
It cuts strictly on the pull stroke. Pulling places the 1.2mm SK5 steel blade under tension rather than compression, which completely prevents the blade from bowing, binding, or kinking inside the wood.
Yes. Unlike delicate cabinet saws that snap in yard timber or rough pruning saws that splinter lumber, our 7 TPI triple-bevel omega teeth and matte-black PTFE anti-sap coating cut cleanly through dry White Oak, Black Walnut, dimensional Pine, plywood, and wet 4-inch backyard limbs.
Yes. The black steel spine lock button clicks positively into place when the blade is fully extended so it cannot fold onto your knuckles under load, and it locks again when folded closed so the teeth stay safely recessed inside the handle slot.
Absolutely. The blade is anchored by a machined 8mm silver hex pivot bolt rather than a permanent rivet, allowing you to fine-tune pivot tension or swap the blade in seconds using a standard hex key.
At 285 grams (10 oz), the Talon-SK5 uses a high-impact polymer core overmolded with textured red-and-black TPR rubber to reduce forearm fatigue during overhead pruning. Because pull-stroke teeth cut via geometry rather than downward deadweight, you do not need a heavy cast-iron handle.
Take the Cosari Talon-SK5 into your yard and workshop for 30 full days. Put it through oak, walnut, sappy pine, and tight tree crotches—and if it ever binds, wobbles, or fails to out-cut your old saw, send it back for a full refund. Every saw also includes our 2-Year Blade & Lock Warranty.